How to Scope Concrete Cutting Services Before Requesting Quotes

  •  

Concrete cutting services often become necessary when a building project reaches a point where the existing structure stands in the way of the next stage. A plumber needs a route through the floor for new drainage. A commercial fit-out needs an opening through a concrete wall. A damaged slab section has to come out before replacement work can begin.

For the builder or site supervisor organising those works, the immediate task seems straightforward. Mark up the location, send a few photographs and ask a specialist to quote. The difficulty comes when the prices arrive with different assumptions about what the job includes.

One contractor may have allowed to cut the slab and leave the concrete in place. Another may have included breaking it out, loading it and taking it off site. A third may need a site visit before confirming how the equipment will reach the work area. Comparing the totals at that point tells you very little about which quote covers the job you need done.

For builders, renovation contractors, site supervisors and even homeowners undergoing renovations, a useful quote request connects the concrete work to the rest of the project. It explains what needs to change, what the contractor will encounter on site, and what must be ready when the following trade arrives. Getting those details into the request gives contractors a common basis for pricing and gives you something concrete to check before booking.

Start with the result the next trade needs

A drawing can show where concrete needs cutting without explaining how far the cutting contractor's responsibility extends. That matters because cutting, removal, disposal and reinstatement can involve different people, equipment and bookings.

Consider a proposed drainage trench in an existing floor. Sawing the marked edges is one part of the work. The slab section may also need breaking out or lifting, the concrete needs somewhere to go, and the plumber may need excavation below the slab before installing the pipework. Once the services are installed, someone has to reinstate the floor.

If you are requesting a price for the first two stages, say so. Identify who handles excavation and reinstatement, and describe the condition in which the cutting contractor should leave the area. This lets the contractor allow for the whole requested scope and helps you book the next trade with a clearer understanding of what they will inherit.

The same thinking applies to a wall opening. The installer needs the agreed opening dimensions, and the builder needs to know who removes the cut section, protects the surrounding finishes and handles any making good. "Create opening as marked" leaves several of those decisions unresolved.

Show how the drawing relates to the actual building

Most contractors can give a more useful response when they receive a marked-up drawing alongside photographs of the site. Each provides information the other can miss.

The drawing establishes dimensions, quantities and locations. A wider photograph shows what surrounds the proposed cut, including finished surfaces, nearby equipment and the space available for setting up. Close-ups help explain the condition of the work area. For a wall opening, photographs of both faces, where accessible, can show existing services, joinery or occupied areas that affect how the work is carried out.

Use the same labels on the photographs and drawing. If three openings look similar, referring to them consistently as A, B and C makes it easier to discuss the right one by phone. Include the drawing revision, too. If the layout changes while quotes are being prepared, issue the revised information to everyone pricing the work.

Be clear about where measurements came from. A slab described as 150 mm thick on a drawing may need checking against the actual work area. A measurement at an exposed edge elsewhere in the building may leave uncertainty about the proposed cut. Ask concrete cutting contractors to state what they have assumed where information remains incomplete.

Opening dimensions need similar care. State the required opening from the relevant design or installation detail, including any specified tolerances or restrictions on cuts extending beyond the corners. That gives the contractor a defined result to price and flags questions that need resolving before work begins.

Access affects both the equipment and the concrete leaving site

The work area itself may have plenty of room while the route into it is difficult. A narrow doorway, a turn at the end of a corridor or a step down into the room can affect which equipment the contractor can bring through and how much setup is involved.

Walk the route from unloading to the proposed cut. Give the concrete cutters the clear width of the tightest doorway, photographs of awkward turns and details of any lift or loading restrictions. Identify where water and power can be supplied, so the contractor can confirm whether the available facilities suit the proposed equipment.

Then consider the concrete coming back out. A contractor may be able to bring a saw through a corridor, but removing cut sections through that same route could require additional handling and protection. If a goods lift is involved, its restrictions and booking times belong in the quote request. So do the loading point and any arrangements for storing waste before collection.

Where lifting or temporary support is needed, establish who will arrange the relevant assessment and confirm the method before work starts. The contractor needs to understand how cutting and removal fit together when pricing those works.

For projects across South West WA, South West Concrete Cutting & Drilling offers concrete cutting services for builders covering slab cutting, wall sawing, core drilling, and concrete removal. When requesting a combined quote, specify who handles lifting, loading and disposal so the full scope can be assessed together.

Price the working window and the preparation it depends on

A site being open for a full day does not necessarily give the contractor a full day of cutting. An occupied building might permit noisy work only before trading hours. Access to part of a site might depend on another contractor finishing first.

Those restrictions can change how the job is organised. Equipment still needs unloading and setting up, surfaces may need protecting, and the work area needs cleaning before it is handed back. A job that could otherwise be completed in one visit may require several attendances when the available cutting window is short.

Tell the contractor when they can arrive, when cutting can take place and when the area must be handed back. Ask how many visits the quote includes. This gives you a better basis for comparing a price built around one continuous visit with a price allowing for staged work.

Explain what must happen before cutting can begin. Structural assessments, locating services and arranging isolations may involve other members of the project team. Name who is arranging each required check, what information will be available and when it is expected.

Outstanding information also needs a place in the quote discussion. A contractor may be able to provide a provisional allowance, or may need the checks completed before confirming the price and method. Recording that position early helps you understand what still needs resolving before the booking can proceed.

Agree on clean-up before the area changes hands

Concrete work inside an occupied building needs a clear agreement about protecting the surrounding area and cleaning it afterwards. Finished flooring, adjoining rooms and routes still used by other people can all affect the arrangements.

If wet cutting is proposed, ask who contains and collects the slurry, which is the mixture of water and cutting residue, and who handles disposal. WorkSafe WA warns that slurry left to dry can expose people to airborne respirable crystalline silica if dust is generated. Responsibility for collecting and cleaning it should be agreed before the crew starts.

The handover also needs to account for whoever returns to the space. Clarify when protective coverings are removed, who checks the work area and what condition is required before another trade or the building's occupants return. Put those expectations in the request so contractors can allow for them.

What to Ask Concrete Cutting Contractors to Include in Their Quotes

With the drawings and site information assembled, a short scope statement helps bring the request together. For a drainage trench, you could adapt the following wording and attach it to the marked-up drawing.

Allow to saw-cut and remove the marked slab section, take the concrete off site and clean the work area for the plumber. Excavation below the slab and reinstatement are by others. Ask each contractor to address the same five points in their reply.

● Drawing: Which revision and marked areas have you priced?

● Assumptions: What have you assumed about slab thickness, reinforcement and site access? What would change the price?

● Visits: How many attendances are included under the stated work windows?

● Removal and clean-up: What will you lift, load and take off site? Who handles the slurry and leaves the area clean?

● Handover: What will be ready for the next trade, and what work is by others?

Those answers make differences between quotes easier to resolve. If a contractor has allowed for saw cuts only, request a separate price for removal and disposal. If the work requires a second visit, confirm when it can happen before booking the plumber or installer.

By the time you accept a quote, you should be able to explain what the contractor will complete, what your own team must organise and when the next trade can start. That is the information that turns a concrete cutting price into a workable part of the construction programme.

Additional Blogs

The Psychology of Construction and Why We Accept Inefficiency

There is something unusual about the way the construction industry treats problems. A contractor waits three weeks for a drawing. A subcontractor cannot proceed because a specification remains...

Read more

What Record Build Costs Mean for the Value Engineering Conversation

In construction, you need to give something to get something. Unfortunately, many construction professionals focus solely on initial construction costs rather than evaluating the overall value of a...

Read more

Why Cold Temperatures Are Harder on Site Equipment Than Most Crews Expect

Your loader may have run fine yesterday. After the first hard frost, it cranks slowly, the boom crawls and a hose starts leaking. You lose half a day sorting it out. Cold affects how batteries,...

Read more

Submit your construction content here

Read more
Top
Login Logo